The 50D Serpentine PLATECOIL pass is designed primarily for heating or cooling applications in open tanks when liquid heat transfer media are used. The higher internal velocities obtained with liquids in the Serpentine design generally improve overall heat transfer rates. By merely breaking two connections the Platecoil can be removed without emptying the tank.

Style 50D Serpentine Platecoil in the sizes indicated below are available in double embossed Carbon Steel or double embossed 316 Stainless Steel.

Contact customer service at (847)-740-1599 for size and style needed.
Unit of Measure

Specifications

Gauge Material

N/A 12 - Carbon Steel (ONLY) 14 - Carbon Steel or Stainless Steel 16 - Stainless Steel (ONLY)

Material

N/A 316 Stainless Steel Carbon Steel

Dimension A

N/A 12 "18 "22 "26 "29 "36 "43 "

Dimension B

N/A 23 "29 "35 "47 "59 "71 "83 "95 "107 "119 "131 "143 "

Steam Inlet (MPT)

N/A 3/4 "

Condensate Outlet (MPT)

N/A 3/4 "

Electropolish

Electropolish

N/A This is an economical surface finish for stainless steel. Platecoil which greatly reduces the tendency for scaling in phosphatizing and other similar solutions. Some Style 90D Electropolished Platecoil are available as stock items ready for immediate shipment.

Hangers

Hangers

N/A Standard Platecoil hangers hold the Platecoil at the optimum distance from the tank wall for best chimney effect which improves heat transfer. Just bend the hanger over the edge of the tank at the desired height. Two hangers are used per Platecoil except 12" wide 70A and 60A where only one hanger is needed.

Increase Tank Capacity for Production Work

Increase Tank Capacity for Production Work

N/A A 22" x 47" Platecoil provides the same heat transfer as 32 ft. of 1-1/2" pipe requiring approximately 30" x 60".

Weight About 1/2 as Much as Equivalent Pipe Coil

Weight About 1/2 as Much as Equivalent Pipe Coil

N/A Lightweight Platecoil units are handled easily by one or two individuals - no need for hoisting machinery.

Easy To Install

Easy To Install

N/A "Quick Change Hangers" make Platecoil installation in open tanks easy. It takes just minutes to place the handles of the Platecoil units on the hanger hooks and bend the top of the hangers over the edge of the tank.

Low First Cost

Low First Cost

N/A In most instances, users find costs less to buy Platecoil than to fabricate pipe coils. Reduced installation time saves, too.

Rigid Structural Design

Rigid Structural Design

N/A Platecoil's structural rigidity permits its use as walls, baffles, or partitions. It can be used in many applications where pipe coil is impractical.

Quick Replacement

Quick Replacement

N/A No need to empty a tank to change Platecoil, just set new units in on "Quick Change" hangers. This allows double sets of Platecoil to be rotated quickly between shifts for cleaning with no production downtime.

Easy to Clean

Easy to Clean

N/A The streamlined design of Platecoil makes it unusually simple to clean. Experience also has proved that deposits tend to form less readily on Platecoil than on pipe coils.

High Built - In Safety Factor

High Built - In Safety Factor

N/A Laboratory tests to destruction have demonstrated a built-in safety factor of more than 5 to 1 every Platecoil is factory tested.

Extra Corrosion Resistance

Extra Corrosion Resistance

N/A All stainless steel Platecoil are fully annealed for maximum corrosion resistance at no extra cost as a standard feature. (Only Tranter, Inc. supplies this feature.)