Depth Filtration of Corrosive Liquids

Corrosion resistant stainless steel filter systems for filtration of hot alkaline solutions, some acid solutions, solvents, hydraulic fluids and more.
  • Compact
  • Leakproof
  • Trouble Free
6 MODELS TO CHOOSE FROM
Sethco's compact, portable, "SSI" Centrifugal Filter Systems meet the need in industrial and plating plants for a dependable continuous duty filter system. They are constructed of highly corrosion resistant stainless steel 316 and are recommended for aqueous alkaline and acid solutions to 210ºF.

They meet the need in industrial and plating plants for a continuous duty filter system which is economical to buy and operate.
Unit of Measure

Specifications

Pump Model No.

N/A SI-1040

Pump Flow

N/A 3900 gph14750 lph

Pump Pressure

N/A 25 psi

Standard Motor Characteristics

N/A 1 HP, 208-230/380-460V, 50/60 Hz, 3 ph

Hose (Note 1)

N/A 12 ft. 1 in ID outlet,12 ft 1-1/4 in ID inlet
Recommended Filtration Rate1 N/A 1800 to 2700 gph6800 to 12000 lph

Filter Chamber Model

N/A SS-330

Quantity of Filter Tubes in Chamber

N/A 3 9

Size of Filter Tubes in Chamber

N/A 3 Tubes - 30", 15 Micron 9 Tubes - 10", 15 Micron

Overall Dimensions

N/A 20 x 24 x 45 "50 x 60 x 114 cm

Weight

N/A 150 lbs68.0 kg

Flow Control Valve

N/A Regulates flow of liquid being filtered.

Base

N/A All systems with multi tube chambers are mounted on a rigid plastic panel on rubber tire ball bearing casters. Single tube systems are provided with panel on rubber bumpers.

Sethco Quality and Workmanship

N/A Only the finest workmanship and materials are used in Sethco equipment. Each unit is carefully tested before it is shipped and comes to you fully equipped, ready for instant operation.

Filter Systems For Photo Resist

N/A Filter chamber is equipped with Teflon O-rings. Pump is equipped with Teflon O-ring and #9 ceramic-graphite-Teflon(RC) mechanical seal. Filter tube is cotton, X-fine density with stainless steel core. Motor is explosion proof. Series is SSI-RCE.

Optional Motors

N/A 115/230 V, 50/60 Hz, 1 ph, Expl. Prf. 115/230 V, 50/60 Hz, 1 ph, TEFC 208-220/380-440 V, 50/60 Hz, 3 ph., Expl. Prf. 208-230/380-460 V, 50/60 Hz, 3 ph, TEFC (Includes 3 phase waterproof switch.)

Manufacturer

N/A Sethco

Features

Features

N/A
  • 6 models to choose from with filtration rates from 100-2700 GPH
  • Filters corrosive liquids at temperatures to 210ºF
  • Removes particles down to .5 micron
  • Cover swivels for quick easy filter tube changeover
  • Leakproof, trouble-free operation
  • Portable
  • One year warranty

Recommended For

Recommended For2 N/A
  • Filtering all common alkaline and cyanide plating solutions and some acid baths.(Add nickel up to 5 oz./gal. sulfuric acid at room temperature)
  • Photo resist solutions (See Optional Equipment A).
  • Solvents
  • Ultrasonic Cleaners
    Alkaline Type: Hot Alkaline Cleaners - Emulsion Cleaners
    Acid Type: pH 4 and above
    Solvent Type: Chlorothene - Trichlorethylene - Carbon
    Tetrachloride -Freon
  • Hydraulic Fluids

Filter Chamber

Filter Chamber

N/A Sethco’s "SS" Series stainless steel filter chambers are available in 6 models in capacities from 120 to 2700 GPH (454 to 10,220 LPH) at pressures to 150 psi (10kg/cm²).Corrosion resistant type 316 stainless steel construction makes Sethco'sfilter chambers suitable for filtering most corrosive aqueous or organic liquids without product contamination. Viton O-rings are standard on all models. Teflon is optional for both. These chambers offer quick, easy filter change over.

Sethco Pumps

Sethco Pumps

N/A The centrifugal pumps, constructed of 316 stainless steel, are close coupled to their motors. The pumps are equipped with appropriate mechanical seals, selected for the application. These mechanical seals are available in various materials of construction, depending on application.For specifications, see table 2 on back page or visit Sethco’swebsite at www. sethco.com for complete information.

Filter Tubes

Filter Tubes

N/A Sethco offers a wide selection of cotton and polypropylene filter tubes to meet your specific requirements. Filter tubes are available for controlled filtration from 150 microns down to .5 microns. Cotton, and polypropylene filter tubes are multi-layered processed yarn wound around either perforated stainless or perforated polypropylene core. Each chamber is equipped with a set of #10 cotton, 15 micron tubes with a SS core. Polypropylene tubes are available at no extra charge. Cotton filter tubes are recommended for moderately acid and moderately alkaline solutions (pH 3-11) as well as most solvents. Polypropylene filter tubes are recommended for concentrated acid and concentrated alkaline solutions. We suggest that you include a carton of additional filter tubes with your order.

Hose

Hose

N/A Nylon reinforced vinyl hose is supplied when it is suitable for stated application and temperature. Always advise your application and temperature.

Motors

Motors

N/A Sethco makes available a wide choice of continuous duty, TEFC or explosion proof motors(Observes all safety precautions (such as grounding and bonding requirements) when pumping flammable solutions, as required).The 1/6 and 1/2 HP pumps are normally equipped with single phase motors. One and two HP pumps are provided with a three phase motor. A motor switch and line cord is supplied for all 1/6 HP motors and is optional for other motors up to 1 HP.

Warranty

Warranty

N/A One year warranty against defective parts and workmanship. See Form TC-01 for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let Sethco or an authorized distributor know; liquids being handled, gallons, temperatures and pH.
The standard warranty does not apply when equipment is used contrary to factory recommendations.
Since the policy of Sethco is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligation to previous or future customers.

Note

Note3
N/A Complete model designation includes type of mechanical seal furnished with system.
  • 1 For viscous solutions, such as high speed cyanide solutions, recommended filtration rate is one-half these values.
  • 2 For filtering solutions where stainless steel is not applicable
  • 3