For corrosive liquid filtration
Three new sizes for flow rates to 4500 GPH
DPM/KKM SERIES
Three new sizes for flow rates to 4500 GPH
DPM/KKM SERIES
- 15 sizes with filtration rates from 1 to 4500 GPH.
- Magnetic drive, sealless pumps provide leakproof operation. Each pump is selected for optimum filtration rates.
- Standard chambers are CPVC construction. Kynar construction is available on several models.
- Typical applications include electroplating, pharmaceutical, photographic, radioactive and other sensitive solutions.
- Chambers accept all standard open more
For corrosive liquid filtration
Three new sizes for flow rates to 4500 GPH
DPM/KKM SERIES
Three new sizes for flow rates to 4500 GPH
DPM/KKM SERIES
- 15 sizes with filtration rates from 1 to 4500 GPH.
- Magnetic drive, sealless pumps provide leakproof operation. Each pump is selected for optimum filtration rates.
- Standard chambers are CPVC construction. Kynar construction is available on several models.
- Typical applications include electroplating, pharmaceutical, photographic, radioactive and other sensitive solutions.
- Chambers accept all standard open ended filter and carbon tubes.
- Systems are provided fully assembled and tested with all accessories required for immediate start-up.
- All units are mounted on a rigid corrosion resistant panel. Single tube systems feature panels on rubber bumpers. All multi-tube models are supplied with ball bearing swivel casters.
Each Sethco Magnetic Drive Filter System is provided with a leakproof polypropylene, magnetic drive, sealless centrifugal pump. All standard polypropylene systems are suitable for temperatures to 180 ºF. Kynar® system are available for temperatures as high as 210 ºF.
Each system includes inlet and outlet hose, hose clamps, a set of 15 micron filter tubes, and operation manual for immediate start-up. Every unit is pre-tested to insure proper operation. Single phase motors are provided with grounding plug and overload protection.
All Sethco Magnetic Drive Filter Systems feature no metal contact with solutions to insure long life, dependability, and leakproof operation for most hard to handle applications.
Unit of Measure
Specifications
Series |
N/A DPM |
Material |
N/A CPVC |
Pump Model No. |
N/A PM-1040HG-2T3 |
Max. Operating Temperature |
N/A 180 ºF82 ºC |
System Type |
N/A With Magnetic Drive Sealless Pump |
Flow Rate |
N/A 2400 to 3300 gph9100 to 12500 lph |
Length |
N/A 20 "51 cm |
Width |
N/A 24 "61 cm |
Height |
N/A 60 "152 cm |
| Weight1 | N/A 125.0 lbs62.2 kg |
Quantity of Filter Tubes in Chamber |
N/A 8 24 |
Size of Filter Tubes in Chamber |
N/A 24 Tubes - 10", 15 Micron 8 Tubes - 20", 15 Micron |
Manufacturer |
N/A Sethco |
Filter Chamber
Filter Chamber |
N/A CPVC filter chambers are standard on most systems. Kynar construction is available on some models. All chambers accept economical, standard open ended filter tubes or carbon filter tubes. |
Filter Tubes
Filter Tubes |
N/A Polypropylene, or Cotton, depending on application. Filter tubes are available for controlled filtration from 150 microns to 0.5 micron. Standard densities are coarse (50 microns), medium (25 microns), fine (15 microns), X-fine (10 microns), Special B (1-3 microns), and Special C (0.5 micron). All systems are supplied with 1 set of 15 micron polypropylene tubes. |
- 1 Add approximately 20% for shipping weight.
- 2
