Request a Quote

*(Note: 9000-PPQD-SY will be (2) 4500-PPQ Horizontal Disc Filtration Systems with common slurry tank)

Unit of Measure

Specifications

Precoated Flow Rate (Filtering Capacity)

 N/A 9,000 gph

Open Pumping Capacity

 N/A 9,600 gph

Filtration Surface Area

 N/A 88 ft²

Number of Filter Media

 N/A 88

Filter Media Diameter

 N/A 14 "

Sludge Holding Capacity

 N/A 1.84 in³

Approximate (Crated) Weight

 N/A 1300 lbs

Hose Connection Suction

 N/A 2 in Inlet

Hose Connection Discharge

 N/A 1-1/2 in Outlet

Hose Length

 N/A 20 ft

Motor (TEFC)

 N/A 3 hp (Two Motors)

Pump Options

 N/A PPQ - Magnetic Self-Priming Pump - Standard PPS - Mechanical Seal CRS-40-PP - No Extra Charge

Slurry Tank Option

 N/A WITH SLURRY TANK - Standard

Manufacturer

 N/A Mefiag

Features and Benefits

Features and Benefits

 N/A
  • All polypropylene construction
  • Self-priming magnetic drive pump
  • "Unitized Pack" disc assembly
  • Large sludge holding capacity
  • Low disposal cost
  • High efficiency
  • Pre-coated flow rates to 9000 gph
  • Temperatures to 180°F(82°C)

Filter

Filter

 N/A The filter chamber is constructed of all polypropylene with bottom inlet and bottom discharge. Discharge is o-ring sealed. A powder coated support plate provides added strength. Chamber’s have side mounted inlet/outlet connections for closer mounting to the tank.
Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided.
A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.
Base is polypropylene with stainless steel channel structure and polypropylene feet. Casters are available upon request.

Unitized Pack

Unitized Pack

 N/A A polypropylene, self-priming magnetic drive pump Model PMSP is furnished with a TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight enclosure.

Self-Priming Magnetic Drive Pump

Self-Priming Magnetic Drive Pump

 N/A A polypropylene, self-priming magnetic drive pump Model PMSP is furnished with a TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight enclosure.

Slurry Tank Specifications

Slurry Tank Specifications

 N/A The slurry tank is all polypropylene construction and is furnished with Model PPQD-SY units. Slurry tanks are used to facilitate pre-coating, addition of carbon (if required), and solution makeup. These are sized to store the complete capacity of the filter chamber during changing of the media or maintenance. Inlet/outlet connections are located at the end of the mounting base.

Piping, Valves and Connections

Piping, Valves and Connections

 N/A Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.