Level switch electronics (only) mounted in plastic enclosure. 3-probe units
Unit of Measure

Specifications

Number of Probes

N/A 3

Electronic Assembly

N/A Level switch electronics (only) mounted in plastic enclosure. 3-probe units

Features and Benefits

N/A
  • IMPROVES PROCESS CONTROL:
    • Provides automated control and consistent liquid levels in most conductive aqueous processes, waste treatment tanks and when leak detection is required.
    • Adds protection against damage and tank fires associated with low-level conditions.
    • Two probe units: for single point control.
    • Multi probe units: for two-point control and refill/pump down applications.
  • CORROSION RESISTANT PROBES:
    • Fluoropolymer (PTFE) covered: 316 stainless steel, titanium, Hastelloy C and graphite tipped Hastelloy probe materials.
    • Lengths: up to 48 inches (1220mm) standard.
    • Field trimmable (except graphite probes).
  • CORROSION RESISTANT ENCLOSURES:
    • Control enclosure: gasketed NEMA 1, IP21 flame retardant, polypropylene box with stainless steel hardware.
    • Probe enclosure: vapor tight, flame retardant, polypropylene head with 10-foot (3m) flexible cord and quick connect plug for easy connection to remote circuitry.
  • CERTIFICATIONS:cULus and CE.
  • CAPACITIES:
    • Relay rating: 10-amps at 120 to 240 volts, 50/60Hz, single pole, double throw.
    • Sensing output: 14.5 VAC.
    • Ambient temperature range: 0°F (-18°C) to 104°F (40°C).
    • Maximum solution resistance: 70,000 ohm-CM.
    • Single phase only.
  • SAFETY FEATURES:
    • Ground connection on circuit board.
    • Minimal AC sensing current has no affect on plating processes.
  • OPTIONS AVAILABLE (consult factory):
    • Probe lengths up to 20-foot (6m).
    • LC circuit board can be pre-wired into combination controls.
    • Fluid stilling chambers.
    • Longer probe cords.
    • Probe cord extensions for existing units.
    • 4, 5 or 6-probe devices for multiple level control applications.
  • Safety Note

    N/A Do not use in flammable solutions or in the presence of flammable gases. Does not function in deionized water, oil or other non-conductive solutions.
    Certifications1 N/A
    CE

    cUL US Listed

    Manufacturer

    N/A Process Technology

    Weight

    N/A 5.0 lbs2.5 kg
    • 1 cUL US Listed for UL Type 4/4X, IP62 (indoor)