Request a Quote

Single phase standard, three phase available, add "-3" after element designator, no extra charge. **Specify thermal overload protection desired.

  • Heating element, quartz tube and single or triple guard all sold separately.
  • Standard guard is polypropylene. Fluoropolymer (PTFE) guards available for chromic acid and high temperature applications (180ºF and higher).
Unit of Measure

Specifications

Watts

 N/A 10000 W

Volts

 N/A 480 V

Phase

 N/A Single (Standard) Three

Hot Zone

 N/A 62 "1575 mm

Overall Length

 N/A 71 "1803 mm

Quartz Tube Model

 N/A QM1071J-**

Single Guard Model

 N/A QM71G

Shipping Weight

 N/A 34.0 Pound

Manufacturer

 N/A Process Technology

Weight

 N/A 34.0 lbs15.4 kg

Features and Benefits

Features and Benefits

 N/A
  • SUPERIOR CHEMICAL RESISTANCE: For use in most aqueous acidic plating solutions and pickling tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.
  • RUGGED CONTRUCTION: Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly).
  • OUTSTANDING PERFORMANCE: Watt densities up to 25 watts per square inch (4 w/cm2) ensure long service life.
  • CORROSION RESISTANT HEAD: Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.
  • SAFETY FEATURES:
    • Grounded internal metal element.
    • Thermal protector built in. Replaceable P1 protector standard for solutions up to 180ºF (82ºC).
  • CERTIFICATIONS: cULus listed (less than 4000 watts), and 600 volt CSA only.
  • SIZES:500 watts to 10,000 watts.
  • VOLTAGES: 120 to 600 volts.
  • OPTIONS AVAILABLE (consult factory):Replaceable thermal protectors:
  • P4: for solutions up to 230°F(110°C).
  • Resettable thermal protectors:
  • P2: for solutions up to 180°F(82°C).
  • P6: for solutions up to 230°F(110°C).
  • Special configurations and lengths.
  • Longer wire and conduit lengths.
  • Three phase elements.
  • Fluoropolymer(PTFE) guards for chromic acid or solutions over 180°F(82°C).
  • Lower watt densities for highly viscous solutions.
  • Temperature and level controls sized to match the heater (sold separately).

Options Available

Options Available1 N/A Comes Standard with Replaceable thermal protector: P1: for solutions up to 180°F (82°C). Replaceable thermal protector: P4: for solutions up to 230°F (110°C). Resettable thermal protector: P2: for solutions up to 180°F (82°C). Resettable thermal protector: P6: for solutions up to 230°F (110°C).

Note

Note2
N/A

NOTE: Not for use in hydrofluoric acid or alkaline solutions.
  • 1 Consult factory
  • 2