*(Note: 7000-PPQD-SY will be (2) 3500-PPQ Horizontal Disc Filtration Systems with common slurry tank)
Unit of Measure

Specifications

Precoated Flow Rate (Filtering Capacity)

 7,000 gph

Open Pumping Capacity

 7,600 gph

Filtration Surface Area

 64 ft²

Number of Filter Media

 96

Filter Media Diameter

 12 "

Sludge Holding Capacity

 .93 in³

Approximate (Crated) Weight

 1100 lbs

Hose Connection Suction

 2 in Inlet

Hose Connection Discharge

 1-1/2 in Outlet

Hose Length

 20 ft

Motor (TEFC)

 2 hp (Two Motors)

Pump Options

 PPQ - Magnetic Self-Priming Pump - Standard PPS - Mechanical Seal CRS-40-PP - No Extra Charge

Slurry Tank Option

 WITH SLURRY TANK - Standard

Manufacturer

 Mefiag

Features and Benefits

Features and Benefits
  • All polypropylene construction
  • Self-priming magnetic drive pump
  • "Unitized Pack" disc assembly
  • Large sludge holding capacity
  • Low disposal cost
  • High efficiency
  • Pre-coated flow rates to 7000 gph
  • Temperatures to 180°F(82°C)

Filter

Filter

 The filter chamber is constructed of all polypropylene with bottom inlet and bottom discharge. Discharge is o-ring sealed. A powder coated support plate provides added strength. Chamber’s have side mounted inlet/outlet connections for closer mounting to the tank.
Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided.
A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.
Base is polypropylene with stainless steel channel structure and polypropylene feet. Casters are available upon request.

Unitized Pack

Unitized Pack

 The disc assembly is all polypropylene with threaded center core and top nut for locking the discs into a one-piece unitized pack. Bottom support plate is designed for uniform liquid distribution while the top support plate provides for recirculation of the liquid to the filter media.
A locking/lifting handle is furnished to secure the lock nut into place and to facilitate the easy removal and replacement of the unitized pack.
Filter media selected for the application is placed between the rigid polypropylene discs. Ten (10) micron cellulose is standard. Carbon/cellulose (10 micron) and polypropylene of various densities are available.

Self-Priming Magnetic Drive Pump

Self-Priming Magnetic Drive Pump

 A polypropylene, self-priming magnetic drive pump Model PMSP is furnished with a TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight enclosure.

Slurry Tank Specifications

Slurry Tank Specifications

 Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.

Piping, Valves and Connections

Piping, Valves and Connections

 Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.