Request a Quote
  • Provides a flow rate of 1200 gallons per hour (4500 LPH) using a totally enclosed, fan-cooled, 1/12th-HP (60-watt) motor
  • Available in multiple body lengths to custom fit your tank
  • Uses only a 4-inch-square (10-cm-square) area of tank space
  • Accepts easy-to-attach filters in many sizes
  • Industry workhorse

A complete, ready-to-operate portable filter system.

The BX1200 filter system is shipped complete, ready to operate, with the following accessories:

1. Heavy-duty handle

2. Removable drip cover

3. 45 Deg. elbow

4. 3" (8-cm) outlet extension

5. One 10"-long (25-cm) Magnum reusable filter cartridge & filter plug

6. 1" (2.5-cm) Universal Bracket

The BX1200 provides a maximum flow rate of 1200 gallons (4500 liters) per hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (4", 6", 8", 10", 12" and 14") enable use of the BX1200 in tanks with varying solution levels and depths.

The BX1200 comes complete, preassembled, and ready to operate and includes the items shown in the labeled photograph below. For best results in most metal finishing solutions, use the BX1200 with our FK50 Poly-Spun disposable filter cartridges in the appropriate length.

Important!
To ensure proper priming, solution must always be above Weep Hole on pump body. Specify length of pump body when ordering.

Unit of Measure

Specifications

Pump Materials of Construction

 N/A CPVC

Shaft Material

 N/A PTFE-covered 303 stainless-steel (Standard)
Flow Rate1 N/A 1200 gallons per hour (4500 liters per hour) at 60 Hz

Pressure

 N/A 12 feet (3.6 meters) of head pressure

Motor Rating

 N/A 115 V, 2.6 A, 60 Hz 230 V, 1.3 A, 50/60 Hz

Motor Speed

 N/A 3000 rpm

Motor Power

 N/A 1/12 hp60 W

Motor Features

 N/A Epoxy coated, TEFC, Thermally Protected

Phase

 N/A Single

Dimension A

 N/A 9-1/16 "23 cm

Optional - Filter Holder

 N/A NFH10 Nut-Style, 10" Length ($32.00)NFH15 Nut-Style, 15" Length ($40.00)NFH20 Nut-Style, 20" Length ($44.00)
Weight2 N/A 10.0 lbs4.5 kg

Note

Note3
N/A

Running Pump Dry Does Not Damage Motor, Pump, Seals or Bearings

The Nut-Style Filter Holder allows you to change filter cartridges without loosening the Filter Screws on the Flo King pump. Just unscrew Threaded Nut from bottom of Stem, remove old cartridge, install new cartridge, tighten Nut and resume filtration.
  • 1 A flow-rate reduction of 18% (±3%) is typical when operated at 50 Hz.
  • 2 About 10 pounds (4.5 kg) in CPVC, depending on pump body length
  • 3