The high-performance DTX-12000 Dynatronix by Process Technology Power Supply will bring your process to the next level, delivering accurate, ultra-low ripple DC power.

Inside high-efficiency silicon carbide (SiC) components and synchronous rectification (SR) reduce process energy consumption, while the modular 19-inch external footprint allows for scalable power levels up to 120,000W.

Paired with the new M-1 Controller featuring digital controls, a bright LCD screen, advanced data logging, andmore
Unit of Measure

Specifications

Maximum Rated Power

24,000 Watts

Number of Power Modules

2

Output Voltage (DC)

48

Output Current (Amps)

500

Watts

24,000 W

Safe Operating Load Range

0 - 100% of unit voltage and current rating

Output Voltage Regulation

Max. +/- 0.5% of setting for 20-100% of unit rating Max. +/- 0.5% of unit rating for 3-20% of unit rating

Output Current Regulation

Max. +/- 0.5% of setting for 10-100% of unit rating Max. +/- 0.5% of unit rating for 3-10% of unit rating

Ripple, RMS Noise

Less than 0.3% RMS of unit rating (0-5kHz)

Efficiency

91% and higher at rated output

Power Factor at Rated Load

0.95 at rated output

Enclosure

Powder coated aluminum

Cooling

Forced Air

Sealing

True Sealing with two 100% sealed air ducts

Operating Temperature

32 F - 104 F / 0 C - 40 C, indoor use only

Storage Temperature

-4 F - 158 F / 20 C - 70 C

Humidity

20-80% RH non-condensing

Maximum Installation Height

2000m

Dimensions

10.10" H (3U) x 19" W x 26.1" D including 19" brackets and output busbars

Voltage and Phase Required:

380-480V +/-10%, 3ph, 50-60Hz

Controller

M1F = Flush Mount, Rear exit M1T = Tabletop Mount, Rear exit M1W = Wall Mount, Bottom exit (std)

Cable Length

1 = 10 feet/3m (std) 2 = 25 feet/7.5m 3 = 50 feet/15m 4 = 100 feet/30m

Options

AC = Advanced Process Control, Recipe, 200Hz AS = Analog Signals 0-10V or 4-20mA Blank = No options (std) DL = Data Logging EI = Ethernet/IP Communication

Certifications

ETL listed to UL 61010-1 and CSA, C22.2#61010-1, CE certified

Warranty

2 Years

Weight

118.0 lbs

Manufacturer

Dynatronix
Note1
*Number of required power modules to be connected in parallel by customer. Each power module requires AC supply. Parallel management done by M-1 Controller. Communication cables included. DC Connection not included - Customer Supplied.
  • 1