The Dynatronix by Process Technology - MicroStar Series is one of the most flexible product lines available. Multiple options for control interface. Switch mode design for small footprint. Rugged, environmentally-sealed, powder-coated enclosure. Simple to use, yet packed with features, MicroStar power supplies are designed to be used in almost any general metal finishing application. Models in the 0.1 to 3 ampere output range are ideally suited for laboratory or R&D applications. DC, Air coolded, Benchtop 1-3 amps, 12-100 volts, 100 watts.
Unit of Measure
Specifications
Output Voltage (DC) |
N/A 0-12 |
Output Current (Amps) |
N/A 0-3 |
Voltmeter Resolution |
N/A *0.1/0.01 |
Amp Meter Resolution |
N/A 0.0 - 299.9 Milliamps (Average) in 0.1 Milliamp Increments 300 - 3000 Milliamps (Average) in 1 Milliamp Increments |
Cooling |
N/A Convection |
Dimensions |
N/A 5.85" H x 12" W x 13.5" D |
Voltage and Phase Required: |
N/A 110-120V, 50-60 Hz, 1 ph 208-240V, 50-60 Hz, 1 ph |
|
Note1
|
N/A *Meter readings below 10 volts will show 0.01 Volt Resolution.Minimum Suggested Setting: 1% of maximum rated output. |
Line Regulation |
N/A +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater |
Load Regulation |
N/A +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater |
Digital Meter Accuracy |
N/A +/- 1% plus L.S.D. |
Temperature Stability |
N/A 0.2% of peak rating after 15 minute warm up |
Ripple |
N/A <1% RMS of maximum rated output voltage |
Controller |
N/A FrontPanel+ Host Control Program for process set-up and process storage and data logging |
Options |
N/A Analog interface board: 0-12V Analog interface board: 0-5V Analog interface board: 4-20mA Auxiliary totalizer with relay output to turn on/off pumps, mixer, etc. Ramp timer Recipe creation and storage Trickle current |
Warranty |
N/A 2 Years |
Weight |
N/A 15.0 lbs |
Manufacturer |
N/A Dynatronix |
- 1
