Request a Quote
The high-performance DTX-6000 Dynatronix by Process Technology Power Supply will bring your process to the next level, delivering accurate, ultra-low ripple DC power.

Inside high-efficiency silicon carbide (SiC) components and synchronous rectification (SR) reduce process energy consumption, while the modular 19-inch external footprint allows for scalable power levels.

Paired with the new M1 Controller featuring digital controls, a bright LCD screen, advanced data logging, and Ethernet/IP connectivity capability, the DTX-6000 delivers superior performance and premium power. DC, 200Hz, Air cooled, 60-5,000 amps, 12-100 volts, 6,000-60,000 watts.

The Power Modules can be connected in parallel by customer. Each power module requires AC supply. Parallel management done by M-1 Controller.
Unit of Measure

Specifications

Maximum Rated Power

 N/A 48,000 Watts

Number of Power Modules

 N/A 8

Output Voltage (DC)

 N/A 60

Output Current (Amps)

 N/A 800

Watts

 N/A 48,000 W

Safe Operating Load Range

 N/A 0 - 100% of unit voltage and current rating

Output Voltage Regulation

 N/A Max. +/- 0.5% of setting for 20-100% of unit rating Max. +/- 0.5% of unit rating for 3-20% of unit rating

Output Current Regulation

 N/A Max. +/- 0.5% of setting for 10-100% of unit rating Max. +/- 0.5% of unit rating for 3-10% of unit rating

Ripple, RMS Noise

 N/A Less than 0.3% RMS of unit rating (0-5kHz)

Efficiency

 N/A 90%-96% efficiency at rated output and depending on output voltage rating

Power Factor at Rated Load

 N/A 0.95 at rated output

Enclosure

 N/A Powder coated aluminum

Cooling

 N/A Forced Air Cooling

Sealing

 N/A True Sealing with two 100% sealed air ducts

Operating Temperature

 N/A 32 F - 104 F / 0 C - 40 C, indoor use only

Storage Temperature

 N/A -4 F - 158 F / -20 C - 70 C

Humidity

 N/A 20-80% RH non-condensing

Maximum Installation Height

 N/A 2000m

Dimensions

 N/A 40.40" H (3U) x 19" W x 26.1" D including 19" brackets and output busbars

Voltage and Phase Required:

 N/A 208-240V, 50-60 Hz, 3 ph

Controller

 N/A M1F = Flush Mount, Rear exit M1T = Tabletop Mount, Rear exit M1W = Wall Mount, Bottom exit (std)

Cable Length

 N/A 1 = 10 feet/3m (std) 2 = 25 feet/7.5m 3 = 50 feet/15m 4 = 100 feet/30m

Options

 N/A AC = Advanced Process Control, Recipe, 200Hz AS = Analog Signals 0-10V or 4-20mA Blank = No options (std) DL = Data Logging EI = Ethernet/IP Communication

Certifications

 N/A ETL listed to UL 61010-1 and CSA, C22.2#61010-1, CE certified

Warranty

 N/A 2 Years

Weight

 N/A 392.0 lbs

Manufacturer

 N/A Dynatronix
Note1
N/A *Number of required power modules to be connected in parallel by customer. Each power module requires AC supply. Parallel management done by M-1 Controller. Communication cables included. DC Connection not included - Customer Supplied.
  • 1