Print Back
Double Duty Infiltrator System
Unit of Measure

Specifications

Chamber Model No.

N/A VCA-11 (PVC)

Pump Model No.

N/A ZDX-1/3

System Type

N/A With Self Priming Vertical In-Tank Pump & Floor Mounted Chamber

Max. Operating Temperature

N/A 140 ºF60 ºC

Motor (TEFC)

N/A 1/6 hp

Voltage and Phase Required:

N/A 115V, 60 Hz, 1-Phase

Carbon Capacity

N/A 6 lbs

Carbon Flow Rate

N/A 300 gph1100 lph

Inlet NPT

N/A 3/4 "

Outlet NPT

N/A 1/2 "

Manufacturer

N/A Sethco

Filter Chamber

Filter Chamber

N/A Model PMSP polypropylene, self-priming magnetic drive centrifugal pump is furnished with a TEFC motor.

Model PM polypropylene, magnetic centrifugal drive pump is furnished with a TEFC motor.

Model ZDX corrosion resistant CPVC vertical pump. The versatile pump is specially designed to be mounted in-tank for self priming convenience or out-of-tank to save in-tank space. The pump incorporates a unique opposing twin-impeller design to provide high volume circulation and eliminate leakage up the pump column. No bearings or seals and no wearing parts permit dry running without damage. CPVC construction eliminates any metal contact with solution.

Pump

Pump

N/A Model PMSP polypropylene, self-priming magnetic drive centrifugal pump is furnished with a TEFC motor.

Model PM polypropylene, magnetic centrifugal drive pump is furnished with a TEFC motor.

Model ZDX corrosion resistant CPVC vertical pump. The versatile pump is specially designed to be mounted in-tank for self priming convenience or out-of-tank to save in-tank space. The pump incorporates a unique opposing twin-impeller design to provide high volume circulation and eliminate leakage up the pump column. No bearings or seals and no wearing parts permit dry running without damage. CPVC construction eliminates any metal contact with solution.

Motors

Motors

N/A All motors are TEFC. All motors 1 HP are equipped with waterproof switch and grounded cord for 115V standard.

Accessories

Accessories

N/A All models are complete with inlet strainer, hose and hose clamps, filter cartridges and activated granular carbon are not included, as required, for start-up and continuous operation.

All models with horizontal pump, are mounted on a rigid phenolic panel with rubber tire ball bearing casters for portability.

Media Specifications

Media Specifications

N/A Organic impurities Removed with Mefiag Activated Granular Carbon. A specially processed carbon has been designed for purification of plating solutions. The granules have much greater surface area than conventional carbons. This carbon is extremely adsorptive yet highly selective. It quickly and completely removes organic impurities. Dye contaminants from nickel acetate sealing solutions and crack detection liquids are easily removed. The low cost carbon charge eliminates all mess. No slurries no time lost no solution lost a minimum of handling, and best of all no expensive cartridge to buy. In-Filtrator Systems can hold up to 75 pounds of activated granular carbon.

Solid Impurities Removed with Mefiag Depth Filter Tubes. Mefiag has designed its depth filter cartridges with O-ring seals to make replacement quick and easy. This patented feature provides 100% depth filtration with no possibility of liquid bypassing, assures no leakage and takes full advantage of maximum filtration area.

Warranty

Warranty

N/A One year warranty against defective parts and workmanship. Request Mefiag's Terms and Conditions for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let us or an authorized distributor know: liquids being handled, gallons, temperature and pH. The standard warranty does not apply when equipment is used contrary to factory recommendations.

Since our policy is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligation to previous or future customers.