Print Back
The Dynatronix by Process Technology - MicroStar is one of the most flexible product lines we offer. Designed to be used in almost any general metal finishing application. Simple to use, yet packed with features. Models in the 0.1 to 3 ampere output range are ideally suited for laboratory or R&D applications. DC, High Frequency Pulse (HFP) or Pulse Reverse, Air cooled, Benchtop, 0.1-6 amps, 0-10 volts, 60 watts.

Features:

*System Output: DC, High Frequency Pulse (HFP) or Pulse Reverse
*Small
more
Unit of Measure

Specifications

Output Voltage (DC)

0-10

Max Avg/Peak Current (Amps)

0.1/0.3

Voltmeter Resolution

*0.1/0.01

Amp Meter Resolution

0.0 - 100.0 Milliamps (Average) in 0.1 Milliamp Increments

Cooling

Convection

Dimensions

5.85" H x 12" W x 13.5" D

Voltage and Phase Required:

110-120V, 50-60 Hz, 1 ph 208-240V, 50-60 Hz, 1 ph
Note1 *Meter readings below 10 volts will show 0.01 Volt Resolution. #Meter Resolution: Forward or Effective. Minimum Suggested Setting: 1% of peak current rating.

Line Regulation

+/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater

Load Regulation

+/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater

Digital Meter Accuracy

+/- 1% plus L.S.D.

Temperature Stability

0.2% of peak rating after 15 minute warm up

Ripple

<1% RMS of maximum rated output voltage

Controller

FrontPanel+ Host Control Program for process set-up, process storage and data logging

Options

Analog interface board: 0-10V Analog interface board: 0-5V Analog interface board: 4-20mA Auxiliary totalizer with relay output to turn on/off pumps, mixer, etc. Ramp timer Recipe creation and storage Trickle current

Warranty

2 Years

Weight

15.0 lbs

Manufacturer

Dynatronix
  • 1