Model |
N/A SSF-15C |
| Max. Filtration Rate1 | N/A 1500 gph |
Max. Pressure |
N/A 22 ft |
Max. Immersion Level Dimensions |
N/A 9 " |
Min. Immersion Level Dimensions |
N/A 5-5/16 " |
Motor Power |
N/A 1/6 hp |
Voltage |
N/A (Standard) 115V 1PH V230/460V 3PH V($346.85)230V 1PH V($65.78) |
Frequency |
N/A 60/50 Hz |
Phase |
N/A Single (Standard) Three |
Standard Filter Tube |
N/A (1) MSC15P10P |
Net Weight |
N/A 24 lbs |
Options |
N/A Double Filter Holder ($160.27) |
Materials of Construction |
N/A The high strength qualities and rigidity of CPVC make the SSF Series suction filter systems extremely rugged, yet wear and impact resistant, and capable of handling the roughest of corrosive liquids and sensitive solutions at 200 ºF (93 ºC). Wetted parts are CPVC so there is no metal contact with liquid. |
Effective Filtration |
N/A
Sethco suction filter systems are equipped with easily inserted. appropriately sized Sethco depth filter tubes. These are precision wound polypropylene fiber over a polypropylene perforated supporting core, forming hundreds of funnel shaped tunnels. Each layer of fiber serves as its own filter screen. The close winding pattern (density) determines the size of the particle retention. Filter tubes are available with solids handling retention values of 50 down to 0.5 micron. Sub-micron filter tubes are also available. Depth filtration area over the entire thickness of the Sethco No. 5 filter tube is 2.0 sq. ft.; of the No. 10 filter tube is 3.5 sq. ft.; of the No. 20 filter tube is 7.0 sq. ft.; and of the No. 30 filter tube is 10.5 sq. ft. Simultaneous carbon treatment and filtration to 10 micron can be achieved by using Sethco carbon/filter tubes. |
Motors |
N/A
Sethco "SSF" electric motors are all totally enclosed, fan cooled. U.L. recognized, CSA approved and continuous duty rated. The motors are protected by special corrosion resistant paints and insulated windings. In addition, they have a corrosion resistant drip cover. The motors are equipped with over-sized, double sealed ball bearings, and have a one-piece shaft to prevent impeller whip and assure long life. All 1/6 horsepower and larger motors are equipped with a lip seal where the stainless steel shaft enters the motor to help prevent vapors and liquid from entering. |
Features |
N/A
One year warranty against defective parts and workmanship. See Form TC-01 for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let Sethco or an authorized distributor know: liquids being handled, gallons, temperature and pH. The standard warranty does not apply when equipment is used contrary to factory recommendations. Since the policy of Sethco is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligations to previous or future customers. |
Warranty |
N/A
One year warranty against defective parts and workmanship. See Form TC-01 for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let Sethco or an authorized distributor know: liquids being handled, gallons, temperature and pH. The standard warranty does not apply when equipment is used contrary to factory recommendations. Since the policy of Sethco is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligations to previous or future customers. |
Manufacturer |
N/A Sethco |
