Fluoropolymer (PTFE) Heaters
fluoropolymer-ptfe-heaters
GUARDS SOLD SEPARATELY /Asset/a1176.jpg
GUARDS SOLD SEPARATELY /Asset/a1177.jpg
GUARDS SOLD SEPARATELY /Asset/a1180.jpg
GUARDS SOLD SEPARATELY /Asset/a1181.jpg
GUARDS SOLD SEPARATELY /Asset/a1157.jpg
GUARDS SOLD SEPARATELY /Asset/a1158.jpg
GUARDS SOLD SEPARATELY /Asset/a1153.jpg
GUARDS SOLD SEPARATELY /Asset/a1161.jpg
GUARDS SOLD SEPARATELY /Asset/a1162.jpg
ORDERING EXAMPLE: HXRL3414-16L-FR54-P3
L-shaped (serpentine configuration), fluoropolymer, 3,000 watts, 480 volt, 14" width, 16" length, riser located in the front left corner, 54" flex riser, P3 thermal
protector. /Asset/HXRL Series.png

HX Series, Spiral Fluoropolymer (PTFE) Heaters
(19) **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1176.jpg

HXL Series, Spiral L-Shaped Fluoropolymer (PTFE) Heaters
(19) *Specify vertical length by adding height in inches after "R". **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1177.jpg

HXF Series, Low Profile Fluoropolymer (PTFE) Heaters
(15) **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1180.jpg

HXFL Series, Low Profile L-Shaped Fluoropolymer (PTFE) Heaters
(15) *Specify vertical length by adding height in inches after "R". **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1181.jpg

HXO Series, Fluoropolymer (PTFE) Heaters
(19)**Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).
GUARDS SOLD SEPARATELY

3HXO Series, Multi Element Fluoropolymer (PTFE) Heaters
(16) Three phase standard, insert "-1" for single phase. **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1157.jpg

3HXOL Series, Multi Element L-Shaped Fluoropolymer (PTFE) Heaters
(14) Three phase standard, insert "-1" for single phase. *Specify vertical length by adding height in inches after "R". **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1158.jpg

3HX Series, 3 Element Fluoropolymer (PTFE) Heaters
(15) Three phase standard, insert "-1" for single phase. **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1153.jpg

6HX Series, 6 Element Fluoropolymer (PTFE) Heaters
(15) Three phase standard, insert "-1" for single phase. **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1161.jpg

9HX Series, 9 Element Fluoropolymer (PTFE) Heaters
(14) Three phase standard, insert "-1" for single phase. **Specify thermal overload protection desired. Guards are recommended on over the side heaters and required on L-Shaped heaters. Standard guard is polypropylene. Fluoropolymer (PTFE) guards recommended for chromic acid and solutions exceeding 180º F (82ºC).GUARDS SOLD SEPARATELY /Asset/a1162.jpg

HXRL Series, Flex Riser Fluoropolymer (PTFE) Heaters
(57) Single phase only. **Specify thermal overload protection desired. Fluoropolymer (PTFE) guards standard. Riser pictured in left position, right position available. Other dimensional configurations available, consult factory.ORDERING EXAMPLE: HXRL3414-16L-FR54-P3
L-shaped (serpentine configuration), fluoropolymer, 3,000 watts, 480 volt, 14" width, 16" length, riser located in the front left corner, 54" flex riser, P3 thermal
protector. /Asset/HXRL Series.png

HXOL Series, Flex Riser Fluoropolymer (PTFE) Heaters
(45) Single phase only. **Specify thermal overload protection desired. Fluoropolymer (PTFE) guards standard. Riser pictured in left position, right position available. Other dimensional configurations available, consult factory. /Asset/HXOL Series.png
HXSL Series, Flex Riser Fluoropolymer (PTFE) Heaters
(13) Single phase only. **Specify thermal overload protection desired. Riser pictured in left position, right position available. Other dimensional configurations available, consult factory. /Asset/HXSL Fluoropolymer Heater.png
HXT Series, Fluoropolymer (PTFE) Screw Plug Heaters
(13)Single phase only. Comes standard with Resettable thermal protector: P3: for solutions up to 250°F (121°C).
/Asset/ProTech - HXT Series - Picture.png
3FLX Series, 3" 150 LB. Style Single Element Fluoropolymer (PTFE) Flanged Heaters
(12)Single phase only. **Specify P2 or P8 thermal overload protection desired. NOTE: Heater rated for 50 PSI.
/Asset/ProTech - FLX Series - Picture.png