Catalog

The Dynatronix by Process Technology DTX-2400 power convertor is the latest generation of DC power supplies for precision plating with features and benefits that set it apart from the current products in the market today. Utilizing switch mode technology to pack 2400 watts of output power into a compact footprint for the most efficient use of space with an environmentally sealed enclosure. Truly a powerhouse that packs a punch! DC, 200Hz, Air cooled, Benchtop 10-100 amps, 0-100 volts, 2400 watts, switch-mode technology. Standard features include ampere time & real time cycle control, output ramp, output tolerance settings & alarms, Ethernet & analog communications, digital I/O, universal AC input, power factor correction and much more.

Features:

*System Output: DC.
*Models from 0-100 volts and 0-100 amps.
*Maximum output: 2400 watts.
*Multi-button, menu driven 4.3" full color display.
*Rugged, environmentally sealed enclosure & connectors.
*Switch-mode design for small footprint.
*Ampere time and real time cycle control.
*Constant current, constant voltage, and cross-over regulation modes.
*Ethernet/IP communications.
*Electronic overload, over-temperature, and short circuit protection.
*Forced air cooled.
*ETL, CSA and CE certified.

Pro Series Power Supplies: Customize to Your Exact Needs!

One of the most sophisticated power supplies available in the metal finishing industry today, the Pro Series offers the flexibility to be adapted to the most complex process. From sophisticated electroplating applications in the semiconductor industry to high end nitinol electropolishing in the medical device market, the Pro Series can meet the needs of the most challenging applications.

The Pro Series is a completely programmable power supply, built in a series of modules. Multiple cells, channels within those cells, and differing outputs from the channels, are available. Such flexibility allows the Pro series power supply to be utilized for such applications as multiple cathodes, multiple or segmented anodes, and multiple plating baths. Pulse, Air cooled, XR, 0.001-50 amps, 1-350 volts.

Features:

*Real Time Cycle Control
*Ampere Time Cycle Control
*Ampere Time Totalizer
*Process set-up generation
*Process set-up storage
*RS485 and USB ports
*Process data logging
*Error signals for output out-of-tolerance
*Calibration - A separate Windows-based software program, Dynacal ll, is provided with each power supply. This is a manually-controlled program allowing the user to check and adjust calibration from a desktop or laptop computer. A semi-automated version is also available as an option.

Specifications:

*Current outputs from 0.001 to 50 amperes at 1-350 Volts DC.
*PC-based programmable controls.
*Selectable current, voltage & crossover regulation modes.
*Save/recall multiple process steps.
*Create/save/recall recipes incorporating multiple process steps.
*Pulse Timing (Pulse Units Only).
   - Multiple pulse timing configurations are available. For example, a four-digit control can provide.     ON/OFF Pulse Timing and Direction Timing such as:
     - Direction: 1-999 milliseconds - Resolution: 1 millisecond.
     - ON/OFF: 0.01-999.99 milliseconds - Resolution: 0.01 milliseconds.
     - Frequency Stability: A minimum of 0.05% over the operating temperature and voltage range.
     - Pulsed Output Waveshape: Square wave.
*Pulse Rise and Fall Times (Pulse Units Only)
   - Typical rise and falls times are 20 microseconds maximum into a non-inductive load resistor of       1.66 ohm. Rise and fall times depend on model and load.
   - Rise and fall times measured between 10-90% of pulse amplitude.
   - Overshoot of Output Current: in current regulation mode, shall be less than the greater of:
   - 10% of the peak output current setting or 1% of the peak output current rating of the channel.