Process Technology Quartz Heaters

Single phase standard, three phase available, add "-3" after element designator, no extra charge. **Specify thermal overload protection desired.

Heating element, quartz tube and single or triple guard all sold separately.

Standard guard is polypropylene. Fluoropolymer (PTFE) guards available for chromic acid and high temperature applications (180ºF and higher).

Each single tube quartz heater consists of:
Heating +   Quartz   +   Single   =   Complete QM
Element        Tube          Guard         Heater Assembly

Each triple tube quartz heater consists of:
3 Heating   +   3 Quartz   +   Triple   =   Complete QM
Elements         Tubes            Guard       Heater Assembly

Request a Quote

Unit of Measure

Items	QM.5110E QM Series, Quartz Heaters with Metal Elements Add To Cart Request Quote	QM.5210E QM Series, Quartz Heaters with Metal Elements Add To Cart Request Quote	QM1111E QM Series, Quartz Heaters with Metal Elements Add To Cart Request Quote	QM1211E QM Series, Quartz Heaters with Metal Elements Add To Cart Request Quote	QM1117E QM Series, Quartz Heaters with Metal Elements Add To Cart Request Quote
Watts	N/A 500 W	N/A 500 W	N/A 1000 W	N/A 1000 W	N/A 1000 W
Volts	N/A 120 V	N/A 240 V	N/A 120 V	N/A 240 V	N/A 120 V
Phase	N/A Single (Standard) Three
Hot Zone	N/A 7 "178 mm
Overall Length	N/A 10 "254 mm	N/A 10 "254 mm	N/A 11 "279 mm	N/A 11 "279 mm	N/A 17 "432 mm
Quartz Tube Model	N/A QM.510J-**	N/A QM.510J-**	N/A QM111J-**	N/A QM111J-**	N/A QM117J-**
Single Guard Model	N/A QM10G	N/A QM10G	N/A QM11G	N/A QM11G	N/A QM17G
Triple Guard Model	N/A 3QM10G	N/A 3QM10G	N/A 3QM11G	N/A 3QM11G	N/A 3QM17G
Shipping Weight	N/A 9.0 Pound	N/A 9.0 Pound	N/A 10.0 Pound	N/A 10.0 Pound	N/A 11.0 Pound
Features and Benefits	N/A SUPERIOR CHEMICAL RESISTANCE: For use in most aqueous acidic plating solutions and pickling tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection. RUGGED CONTRUCTION: Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly). OUTSTANDING PERFORMANCE: Watt densities up to 25 watts per square inch (4 w/cm2) ensure long service life. CORROSION RESISTANT HEAD: Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. SAFETY FEATURES: Grounded internal metal element. Thermal protector built in. Replaceable P1 protector standard for solutions up to 180ºF (82ºC). CERTIFICATIONS: cULus listed (less than 4000 watts), and 600 volt CSA only. SIZES:500 watts to 10,000 watts. VOLTAGES: 120 to 600 volts. OPTIONS AVAILABLE (consult factory):Replaceable thermal protectors: P4: for solutions up to 230°F(110°C). Resettable thermal protectors: P2: for solutions up to 180°F(82°C). P6: for solutions up to 230°F(110°C). Special configurations and lengths. Longer wire and conduit lengths. Three phase elements. Fluoropolymer(PTFE) guards for chromic acid or solutions over 180°F(82°C). Lower watt densities for highly viscous solutions. Temperature and level controls sized to match the heater (sold separately).
Options Available¹	N/A Comes Standard with Replaceable thermal protector: P1: for solutions up to 180°F (82°C). Replaceable thermal protector: P4: for solutions up to 230°F (110°C). Resettable thermal protector: P2: for solutions up to 180°F (82°C). Resettable thermal protector: P6: for solutions up to 230°F (110°C).
Note²	N/A NOTE: Not for use in hydrofluoric acid or alkaline solutions.
Manufacturer	N/A Process Technology
Weight	N/A 9.0 lbs4.1 kg	N/A 9.0 lbs4.1 kg	N/A 10.0 lbs4.5 kg	N/A 10.0 lbs4.5 kg	N/A 11.0 lbs5.0 kg
¹ Consult factory ²

Catalog