Request a Quote
Single phase standard, three phase available, add "-3" after element designator, no extra charge. **Specify thermal overload protection desired.
  • Heating element, quartz tube and single or triple guard all sold separately.
  • Standard guard is polypropylene. Fluoropolymer (PTFE) guards available for chromic acid and high temperature applications (180ºF and higher).
    • Unit of Measure

    Specifications

    Watts

    		 N/A 3000 W

    Volts

    		 N/A 240 V

    Phase

    		 N/A Single (Standard) Three

    Hot Zone

    		 N/A 18 "457 mm

    Overall Length

    		 N/A 29 "737 mm

    Quartz Tube Model

    		 N/A QM329J-**

    Single Guard Model

    		 N/A QM29G

    Triple Guard Model

    		 N/A 3QM29G

    Shipping Weight

    		 N/A 17.0 Pound

    Manufacturer

    		 N/A Process Technology

    Weight

    		 N/A 17.0 lbs7.7 kg

    Features and Benefits

    Features and Benefits

    		 N/A
    • SUPERIOR CHEMICAL RESISTANCE: For use in most aqueous acidic plating solutions and pickling tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.
    • RUGGED CONTRUCTION: Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly).
    • OUTSTANDING PERFORMANCE: Watt densities up to 25 watts per square inch (4 w/cm2) ensure long service life.
    • CORROSION RESISTANT HEAD: Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit.
    • SAFETY FEATURES:
      • Grounded internal metal element.
      • Thermal protector built in. Replaceable P1 protector standard for solutions up to 180ºF (82ºC).
    • CERTIFICATIONS: cULus listed (less than 4000 watts), and 600 volt CSA only.
    • SIZES:500 watts to 10,000 watts.
    • VOLTAGES: 120 to 600 volts.
    • OPTIONS AVAILABLE (consult factory):Replaceable thermal protectors:
    • P4: for solutions up to 230°F(110°C).
    • Resettable thermal protectors:
    • P2: for solutions up to 180°F(82°C).
    • P6: for solutions up to 230°F(110°C).
    • Special configurations and lengths.
    • Longer wire and conduit lengths.
    • Three phase elements.
    • Fluoropolymer(PTFE) guards for chromic acid or solutions over 180°F(82°C).
    • Lower watt densities for highly viscous solutions.
    • Temperature and level controls sized to match the heater (sold separately).

    Options Available

    Options Available1 N/A Comes Standard with Replaceable thermal protector: P1: for solutions up to 180°F (82°C). Replaceable thermal protector: P4: for solutions up to 230°F (110°C). Resettable thermal protector: P2: for solutions up to 180°F (82°C). Resettable thermal protector: P6: for solutions up to 230°F (110°C).

    Note

    Note2
    		N/A NOTE: Not for use in hydrofluoric acid or alkaline solutions.
    • 1 Consult factory
    • 2