Request a Quote
Our smallest CECO Mefiag brand Polypropylene Electroplating Filter Systems feature horizontal disc technology and capacities from 1,200 to 2,400 gph.

The MEFIAG® Advantage
MEFIAG® is recognized throughout the world as the leading supplier of high efficiency, high quality, horizontal disc filters for superior performance. Series 0620-PPM and 0620-PPM-SY is a design that incorporates the best that MEFIAG has to offer including all polypropylene construction and magnetic drive pump as standard.

Designed for the filtration of nickel, copper and zinc electrolytes.
  • Operating Temperature to 180 °F (82 °C)
  • For plating tanks from 200 to approximately 400 gallons depending on the type of process.
  • Can be supplied with horizontal discs or cartridges depending on the application.

    Filter Pack Easily Maintained
    All filter discs are configured as a "unitized pack" to allow easy removal for maintenance. Both disposable and reusable filter media can be utilized.
Unit of Measure

Specifications

Precoated Flow Rate (Filtering Capacity)

 N/A 1,200 gph

Open Pumping Capacity

 N/A 2,400 gph

Filtration Surface Area

 N/A 12 ft²

Number of Filter Media

 N/A 31

Filter Media Diameter

 N/A 8-1/8 "

Sludge Holding Capacity

 N/A 200 in³

Approximate Length

 N/A 40 "

Approximate Width

 N/A 16 "

Approximate Height

 N/A 43 "

Approximate (Crated) Net Weight

 N/A 310 lbs

Hose Connection Suction

 N/A 1-1/2 "

Hose Connection Discharge

 N/A 1-1/4 "

Hose Length

 N/A 10 ft

TEFC Motor

 N/A 1 hp

Pump Options

 N/A PPM - Magnetic End Suction Pump - Standard PPQ - Magnetic Self-Priming Pump - Adder PPS - Mechanical Seal CRS-40-PP - No Extra Charge

Slurry Tank Option

 N/A NO SLURRY TANK - Standard WITH SLURRY TANK - Adder

Manufacturer

 N/A Mefiag

Features and Benefits

Features and Benefits

 N/A
  • All polypropylene construction withstands highly acidic environments
  • Magnetic drive pump with silicone carbide bearings is standard
  • "Unitized Pack"
  • Large sludge holding capacity
  • Low disposal cost (100 GPH per sq/ft of surface area)
  • High efficiency
  • Pre-coated flow rate to 1200 GPH
  • Temperatures to 180 °F(82 °C)
  • Specific gravities to 1.5
  • Shipped ready for immediate operation

Filter

Filter

 N/A The filter chamber is constructed of all polypropylene with bottom inlet and top discharge.
Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided.
A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.
Base is polypropylene with stainless steel channel support structure and polypropylene feet. Casters are available upon request.

Unitized Pack

Unitized Pack

 N/A The disc assembly is all polypropylene. All filters discs are configured as a "unitized pack" to allow easy removal for maintenance. The unitized pack will consist of a bottom plate, bottom gasket, media, center post, pressure plate, and locking nut with handles.
Filter media selected for the application is placed between the rigid polypropylene discs. Ten (10) micron cellulose is standard. Carbon/cellulose (10 micron) and polypropylene of various densities are available.

Magnetic Drive Pump

Magnetic Drive Pump

 N/A A polypropylene, magnetic drive pump Model PM is furnished with a 1HP TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight NEMA 4X enclosure.

Slurry Tank Specifications

Slurry Tank Specifications

 N/A Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.

Piping, Valves and Connections

Piping, Valves and Connections

 N/A Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.