Request a Quote
For Corrosive Liquid Filtration

DPMSP/KKMSP SERIES
  • Self-priming, magnetic drive, corrosion-resistant, sealless pumps.
  • Standard chambers are CPVC construction. Kynar construction is available on several models.
  • Filtration rates from 50 to 4000 GPH (15,000 LPH).
  • No metal contact with liquid being filtered.
  • Typical applications include electroplating, pharmaceutical, photographic, radioactive and other sensitive solutions.
  • Chambers accept all standard open-ended filter and carbon tubes.
  • Systems are provided fully assembled and tested with all accessories required for immediate start-up.
  • All units are mounted on a rigid corrosion-resistant panel. Single tube systems feature panels on rubber bumpers. All multi-tube models are supplied with ball bearing swivel casters.
Optional pressure gauge assembly available for all units.
All Sethco DPMSP Filter Systems feature a self-priming, sealless, magnetic drive pump. On start-up, simply fill the priming chamber and start the pump. Air in the suction line will be evacuated by the pump and liquid will be automatically pulled from the tank, recirculated through the filter chamber and pumped back to the tank. This self-priming start-up is especially desirable when filtering acid, alkaline, or cyanide solutions.
Each filter system is shipped completely assembled and tested, ready for immediate start-up. Included with each system is a set of 15 micron filter tubes, 10 feet of suction hose (140ºF/60ºC Max), 10 feet of outlet hose (170ºF/76ºC Max.), inlet strainer and hose clamps. All motors are TEFC and single phase motors include overload protection. Motor switch and line cord is optional on all motors other than the DPMSP-2412 & DPMSP-3612.
Unit of Measure

Specifications

Material

 N/A Kynar

Pump Model No.

 N/A KMSP-510-1/3T1

Max. Operating Temperature

 N/A 210 ºF99 ºC

System Type

 N/A Self Priming, Magnetic Drive Sealless Centrifugal Pump

Flow Rate

 N/A 300 to 450 gph1135 to 1700 lph

Length

 N/A 20 "51 cm

Width

 N/A 14 "35 cm

Height

 N/A 38 "96 cm

Quantity of Filter Tubes in Chamber

 N/A 1 3

Size of Filter Tubes in Chamber

 N/A 1 Tube - 30", 15 Micron 3 Tubes - 10", 15 Micron

Weight

 N/A 59.0 lbs27.0 kg

Manufacturer

 N/A Sethco

Filter Chamber

Filter Chamber

 N/A Thirteen chamber sizes for depth filtration from 50 GPH to 4400 GPH (190-15,200 LPM). All of the chambers are available in high temperature CPVC (200ºF/93ºC Max.), accept any standard double open-end filter or carbon tube, and provide from 2.1 to 84 square feet of filtration area. Filter tube replacement is fast and easy. PVDF chambers are available on some models.

Pump

Pump

 N/A Sethco "PMSP" pumps combine the convenience of selfpriming, the dependability of magnetic drive and the trouble-free performance of leakproof sealless construction. They are offered in 5 sizes and feature excellent chemical resistance and run dry capability. Standard polypropylene pumps (PMSP models) are suitable for temperatures to 180ºF. A PVDF pump may be substituted (model KMSP) for temperatures to 200ºF and applications such as chromic acid.

Filter Tubes

Filter Tubes

 N/A Filter tubes are available for controlled filtration from 150 microns to .5 micron. Standard densities are coarse (50 microns), medium (25 microns), fine (15 microns), X-fine (10 microns), X-X fine (5 microns), Special B (1-3 microns), and Special C (.5 micron). Carbon tubes can be used for simultaneous carbon treatment and filtration.

Warranty

Warranty

 N/A One year warranty against defective parts and workmanship. See Form TC-01 for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let Mefiag or an authorized distributor know: liquids being handled, gallons, temperatures and pH.
The standard warranty does not apply when equipment is used contrary to factory recommendations.
Since the policy of Mefiag is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligation to previous or future customers.