Metafin Supply Co.
Metafin Supply Co.
26575 W. Commerce Drive, Unit 504 Volo, IL 600739659

Phone: 8477401599
Fax: 8477401930
Email: sales@metafinsupply.com
Print Back
*(Note: HFS Denotes Single Chamber Filter System)
Unit of Measure

Specifications

Precoated Flow Rate (Filtering Capacity)

 N/A 30,000 gph

Open Pumping Capacity

 N/A 36,000 gph

Filtration Surface Area

 N/A 347 ft²

Number of Filter Media

 N/A 59

Filter Media Diameter

 N/A 33 "

Sludge Holding Capacity

 N/A 7.86 ft³

Length

 N/A 93 "

Width

 N/A 70 "

Height

 N/A 88 "

System Connections Suction

 N/A 4"

System Connections Discharge

 N/A 4"

Motor Starter

 N/A Motor starters are NEMA 4X water tight, corrosion resistant with soft start. Variable frequency drive (VFD) is provided with systems that have a slurry tank.
Motor (TEFC)1 N/A 20 HP Fybroc Series 1530

Pump Options

 N/A FYBROC 1530 Fiberglass Pump - Standard

Slurry Tank Option

 N/A NO SLURRY TANK - Standard WITH SLURRY TANK - Adder

Weight

 N/A 3000 lbs

Features

Features

 N/A
  • Single chamber flow rates to 30,000 GPH
  • Maximum surface area for more efficient filtration and fewer change outs (1 sq. ft. per 100 GPH)
  • Large sludge holding capacity
  • Corrosion resistant construction for use in most severe applications
  • Heavy duty FRP pump/1750 rpm
  • CPVC plumbing
  • Polypropylene discs
  • Powder coated steel frame
  • NEMA 4X water tight, corrosion resistant starter with soft start for non slurry filter
  • NEMA 4X starter with Variable Frequency Drive (VFD) for filter with slurry option
  • Temperature to 190ºF (90ºC)
  • Mechanical lifting device for lid

Filter

Filter

 N/A Filter chambers are constructed of mild steel with hard rubber lining (3 mm) on the interior and corrosion resistant paint on the exterior.
A flanged tangential inlet is standard, along with a bottom outlet and drain.
Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. The lifting device provides for mechanical movement of the cover for maintenance purposes.
A pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.
Filter media suited for the application is placed between the rigid polypropylene filter discs. Filter media of various materials and micron ratings are available. Ten (10) micron cellulose is standard.
All systems are mounted on a powder coated structural steel frame with polypropylene feet for leveling.

Pump

Pump

 N/A Fybroc fiberglass centrifugal 1530 Series 4x6x10 pump with 1750 rpm, 20 h.p. motor is standard.

Slurry Tank Specifications

Slurry Tank Specifications

 N/A Slurry tanks are mild steel construction with an interior of hard rubber (3mm) and an exterior of corrosion resistant paint. They are used to facilitate pre-coating and addition of activated carbon(if required), as well as solution make-up and priming of the pump. The slurry tank can also be used to store solution from the filter chamber during changing of media from maintenance. Pre-coating provides superior filtration and extends the life ofthe filter media.

Piping, Valves and Connections

Piping, Valves and Connections

 N/A Piping, valves, and connections are all CPVC construction.
Suction of the pump is piped to permit flow from the solution tank, slurry tank, and the filter chamber.

X-Construction

X-Construction

 N/A X-construction is used for more aggressive solutions such as acid copper, acid zinc, and acid tin. The filter chamber, cover and slurry tank are outside rubber lined, the base is powder coated.
  • 1 Motors are 230-460 VAC (all 60 HZ, three phase). TEFC