Metafin Supply Co.
Metafin Supply Co.
26575 W. Commerce Drive, Unit 504 Volo, IL 600739659

Phone: 8477401599
Fax: 8477401930
Email: sales@metafinsupply.com
Print Back
  • A flow rate of 3000 GPH (11,000 LPH) using a totally enclosed, fan-cooled, 1/3-hp motor
  • Great for tanks of intermediate size or aggressive agitation and fast cleanup of smaller tanks
  • Built in several lengths for most tank configurations
  • A clean source of agitation ... An alternative to air or mechanical agitation
  • Use in one tank or as a utility unit in many tanks
  • Change filters quickly ... no tools, no downtime
No plumbing, clamping or costly installation.
Complete, ready to operate-out of the box and into your tank.
No leaks, no spills!

The BX3000 filter system features a 360 deg. Swiveling Impeller Housing, and is shipped complete, ready to operate, with the following accessories:

1. Heavy-duty handle

2. Double cartridge holder

3. 45 Deg. elbow

4. 3" (8 cm) outlet extension

5. Two 15" (38 cm) Permacore Magnum reusable filter cartridges with one pair of Loading Slats & two heavy blue Filter Plugs

6. 3" (8 cm) Universal Bracket

The BX3000 provides a maximum flow rate of 3,000 Gallons per Hour. Use it stationary on one tank or move it from tank to tank. Multiple body lengths (8", 10", 12", 14", 16", 18" and 20") enable use of the BX3000 in tanks with varying solution levels and depths. The BX3000 comes complete, preassembled, and ready to operate and includes the items shown in the labeled photograph below. For best results in most metal finishing solutions, use the BX3000 with our FK50 Poly-Spun disposable filter cartridges in the appropriate length.

Important!
To ensure proper priming, solution must always be above Weep Hole on pump body. Specify length of pump body when ordering.
Unit of Measure

Specifications

Pump Materials of Construction

 N/A CPVC

Shaft Material

 N/A PTFE-covered 303 stainless-steel (Standard)
Flow Rate1 N/A 3000 gallons per hour (11,000 liters per hour) at 60 Hz

Pressure

 N/A 27 feet (8.2 meters) of head pressure

Motor Rating

 N/A 120 V, 6.0 A, 50/60 Hz, 2850 rpm 240 V, 3.0 A, 50/60 Hz, 3450 rpm

Motor Power

 N/A 1/3 hp250 W

Motor Features

 N/A Epoxy coated, TEFC, Thermally Protected

Phase

 N/A Single

Dimension A

 N/A 16-3/4 "43 cm

Optional - Filter Holder

 N/A NFH10 Nut-Style, 10" Length ($32.00)NFH15 Nut-Style, 15" Length ($40.00)NFH20 Nut-Style, 20" Length ($44.00)
Weight2 N/A 24.0 lbs10.5 kg

Note

Note3 N/A Running Pump Dry Does Not Damage Motor, Pump, Seals or Bearings

The Nut-Style Filter Holder allows you to change filter cartridges without loosening the Filter Screws on the Flo King pump. Just unscrew Threaded Nut from bottom of Stem, remove old cartridge, install new cartridge, tighten Nut and resume filtration.
  • 1 A flow-rate reduction of 18% (±3%) is typical when operated at 50 Hz.
  • 2 About 24 pounds (10.5 kg) in CPVC, depending on pump body length
  • 3