Industrial Dryers from New Holland speed production by drying two ways. Centrifugal force from the spinning action of the basket "throws off" excess water, oils, rinses, or paints. At the same time, a turbine fan mounted below the basket creates a powerful suction that pulls air through the parts load for added drying power. This double-drying action assures fast drying and reduces the scarring and marring frequently responsible for costly rejects. In most cases, you'll get unspotted, moisture-free parts in less than 60 seconds.

Industrial Chipwringers from New Holland are the right choice to reclaim cutting oils from metal chips produced by screw machines, boring mills, grinders, and other machining operations. Chipwringers use centrifugal force to spin cutting oil from a basket of chips.  Simultaneously, a turbine fan mounted below the basket pulls a powerful stream of air down through the parts load, then blows the coolant off the chips towards the drain coupling. You get reusable oil and dry, salable chips quickly. 
 
Sizes range from small table top units of 7 pound capacity for small volumes to large production units of 250 pound capacity for high-volume shops.

The following options are available for models K-24, K-90, and K-94:

  • Soft Start provides a smooth, stepless, reduced-voltage acceleration of the parts load to minimize scarring and scratching of delicate parts. You simply adjust the initial torque and timing of the Soft Start to fit your needs.
  • Variable speed permits reduced-speed operation to minimize damage to sensitive parts
  • NOTE: Only one or the other Soft Start or Variable speed can be ordered at onetime.
  • Timer assists the operator in controlling the time of the complete drying cycle
  • Temperature control maintains heating within a controlled range for parts that are sensitive to excess heating

NOTE: Baskets are not included with Dryers/Chipwringers.

Metafin Supply Company supplies Parts that are not listed on our website.  Please call us now at (847) 740-1599 and speak with a Customer Service person who can help identify, find the exact replacement parts, and troubleshoot your centrifugal dryer problems.

1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Basket Size

Capacity

Motor Size

Operating Speed

Floor Space Required

Weight

Add To Cart/Request Quote
K-11 Tabletop Dryer N/A 6 x 6 in N/A 7 lbs N/A 1/6 hp N/A 1100 rpm N/A N/A 92.0 lbs Add To Cart
Request Quote
K-24 Centrifugal Dryer N/A 12 x 12 in N/A 75 lbs N/A 1 hp N/A 825 rpm N/A 24 x 37 in N/A 400 lbs Add To Cart
Request Quote
K-90 Centrifugal Dryer N/A 18 x 18 in N/A 150 lbs N/A 2 hp N/A 625 rpm N/A 31 x 40 in N/A 615 lbs Add To Cart
Request Quote
K-94 Centrifugal Dryer N/A 18 x 24 in N/A 250 lbs N/A 3 hp N/A 625 rpm N/A 31 x 40 in N/A 690 lbs Add To Cart
Request Quote
K-24C Chipwringer N/A 12 x 12 in N/A 75 lbs N/A 1 hp N/A 825 rpm N/A 24 x 37 in N/A 400 lbs Add To Cart
Request Quote
K-90C Chipwringer N/A 18 x 18 in N/A 150 lbs N/A 2 hp N/A 625 rpm N/A 31 x 40 in N/A 615 lbs Add To Cart
Request Quote
K-94C Chipwringer N/A 18 x 24 in N/A 250 lbs N/A 3 hp N/A 625 rpm N/A 31 x 40 in N/A 690 lbs Add To Cart
Request Quote
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1