Metafin Supply Co.
Metafin Supply Co.
26575 W. Commerce Drive, Unit 504 Volo, IL 600739659

Phone: 8477401599
Fax: 8477401930
Email: sales@metafinsupply.com
Print Back
The Dynatronix by Process Technology - MicroStar is one of the most flexible product lines we offer. Designed to be used in almost any general metal finishing application. Simple to use, yet packed with features. Models in the 0.1 to 3 ampere output range are ideally suited for laboratory or R&D applications. DC, High Frequency Pulse (HFP) or Pulse Reverse, Air cooled, Benchtop, 0.1-6 amps, 0-10 volts, 60 watts.

Features:

*System Output: DC, High Frequency Pulse (HFP) or Pulse Reverse
*Small package size: linear technology
*Rugged, environmentally-sealed, powder-coated enclosure
*Patented Extended Operating Range
*Real Time Cycle Control
*Ampere Time Cycle Control
*Ampere Time Totalizer
*Constant current, constant voltage, and cross-over regulation modes
*High Frequency Pulse (HFP) Output Capability: DC to 5000 Hz pulses
*FrontPanel+ Host Control Program for process set-up generation and process storage/data logging
*RS485 and USB ports for computer control
*Electronic overload, over-temperature, and short circuit protection
*Save/recall up to 10 different process steps
*Convection cooled
Unit of Measure

Specifications

Output Voltage (DC)

 N/A 0-10

Max Avg/Peak Current (Amps)

 N/A 1/3

Voltmeter Resolution

 N/A *0.1/0.01

Amp Meter Resolution

 N/A 0.0 - 299.9 Milliamps (Average) in 0.1 Milliamp Increments 300 - 1000 Milliamps (Average) in 1 Milliamp Increments

Cooling

 N/A Convection

Dimensions

 N/A 5.85" H x 12" W x 13.5" D

Voltage and Phase Required:

 N/A 110-120V, 50-60 Hz, 1 ph 208-240V, 50-60 Hz, 1 ph
Note1 N/A *Meter readings below 10 volts will show 0.01 Volt Resolution. #Meter Resolution: Forward or Effective. Minimum Suggested Setting: 1% of peak current rating.

Line Regulation

 N/A +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater

Load Regulation

 N/A +/- 1% of setting or +/- 0.1% of maximum rating, whichever is greater

Digital Meter Accuracy

 N/A +/- 1% plus L.S.D.

Temperature Stability

 N/A 0.2% of peak rating after 15 minute warm up

Ripple

 N/A <1% RMS of maximum rated output voltage

Controller

 N/A FrontPanel+ Host Control Program for process set-up, process storage and data logging

Options

 N/A Analog interface board: 0-10V Analog interface board: 0-5V Analog interface board: 4-20mA Auxiliary totalizer with relay output to turn on/off pumps, mixer, etc. Ramp timer Recipe creation and storage Trickle current

Warranty

 N/A 2 Years

Weight

 N/A 15.0 lbs

Manufacturer

 N/A Dynatronix
  • 1